MTP to LC Breakout Cables

MTP to LC Breakout Cables

FiberShield Specifications

MTP to LC Breakout Cables utilize a higher performing MPO connector than the standard, developed by US Conec. Each MTP® connector allows for less insertion loss to occur, reduces wear and tear on equipment, and maintains a reliable physical connection. This allows each MTP to LC Breakout Cable to deliver unparalleled performance, especially in critical telecommunications and datacenters.

Need Help? Get Answers from an MTP/MPO Experts

OptoSpan’s 8, 12 and 24 fiber MTP cables feature our new and exclusive FiberShield design. The FiberShield design uses three times the PVC jacket and DuPont Kevlar to protect the delicate optical fibers located inside the cables, resulting in a flexible yet robust 4.5mm cable that is 5x stronger than the standard 3.0mm cable.

The most common uses for MTP to LC Breakout cables include converting higher rates of transmission (40G/100G) to more manageable rates of 10G or lower. Additional uses include the reduction of individual fiber cables, networking equipment, and clutter created by numerous cables.

SanSpot MTP and MPO network design engineers can evaluate your unique situation and recommend a suitable cable configuration. This consultation is complimentary and can be completed in a matter of minutes. Please feel free to contact us toll-free at 1-800-720-3860 or via email at sales@sanspot.com.

For additional information, view our other MTP Cable pages such as MTP Fiber Cables, Plenum MTP Trunk Cables, or Plenum MTP to LC Breakout Cables.

To browse other Fiber Optic Cables, please see MTP Elite Cables, MPO Cables, Armored Fiber Cables, Fiber Patch Cables, Breakout Fiber Cables, Bend-Insensitive Fiber Cables, Bulk/Bare Fiber Spools, Specialty Fiber Optic Cables, or Fiber Pigtails.

8 Fiber MTP Breakout

8 Fiber MTP Breakout

12 Fiber  MTP Breakout

12 Fiber MTP Breakout

48 Fiber MTP Breakout

48 Fiber MTP Breakout

72 Fiber MTP Breakout

72 Fiber MTP Breakout

96 Fiber MTP Breakout

96 Fiber MTP Breakout

144 Fiber MTP Breakout

144 Fiber MTP Breakout

Fiber counts include 8 to 144 individual fibers and may be configured as follows:

8 Fiber – All 8 fibers are contained within a single MTP connector on one end with Low-Loss LC connectors on the opposite end. Supported fiber specifications include Multimode OM3 or OM4.

12 Fiber – All 12 fibers are contained within a single MTP connector on one end with either Low-Loss LC or Low-Loss SC connectors on the opposite end. Supported fiber specifications include Multimode (OM3/OM4) and Single-Mode (OS2).

24 Fiber – Available with either two 12 fiber or one 24 fiber MTP connectors on one end and Low-Loss LC connectors on the opposite end. Supported fiber specifications include Multimode (OM3/OM4) and Single-Mode (OS2).

48 Fiber – Either four 12 fiber, or two 24 fiber MTP connectors on one end and Low-Loss LC connectors on the opposite end. Supported fiber specifications include Multimode (OM3/OM4) and Single-Mode (OS2).

72 Fiber – Either six 12 fiber, or three 24 fiber MTP connectors on one end and Low-Loss LC connectors on the opposite end. Supported fiber specifications include Multimode (OM3/OM4) and Single-Mode (OS2).

96 Fiber – Available with either eight 12 fiber or four 24 fiber MTP connectors on one end and Low-Loss LC connectors on the opposite end. Supported fiber specifications include Multimode (OM3/OM4) and Single-Mode (OS2).

144 Fiber – Available with either twelve 12 fiber or six 24 fiber MTP connectors on one end and Low-Loss LC connectors on the opposite end. Supported fiber specifications include Multimode (OM3/OM4) and Single-Mode (OS2).

These popular configurations allow for compatibility with a wider range of devices and may also help reduce the amount of individual fiber cables throughout a network. Additional configurations are available upon special request. Each MTP to LC Breakout Cable is available with pinned (male) or non-pinned (female) connectors, including any combination of the two to ensure networking compatibility.

The common MTP cable lengths include 1 to 150 meters; however additional lengths are available upon special request.